Product features:

The molded products by integrated injection molding are made of burning-resistant reinforced polypropylene,burning resistant and environment friendly.characterized with easy and convenient “block-building” installation.simple second-aw wiring and low maintenance cost.  

Scope of use:

Applicable for office buildings,large-room offices and transforming old buildings.

Merit introduction of Directly-laid plastic network floor :

1.Energy-saving,environment-friendly,materials able to recycle;

2.Low headroom installation(100west 4cm construction),thoroughly change the traditional concept of office space;

3.Light deadweight able to decrease building weight load.suitable for old building reconstruction and second decoration design;

4.Enforced main board back support,stronger bearing capability than traditional network floor board;

5.45 support points each main board so as to give the building floor average bearing ;

6.Wiring not limited by a design control,able to be changed if need to increase building leasing rate;

7. Installation like block-building which is convenient and quick;

8.Wire slot extending to all directions enabling large wiring amount,and the second-time wiring is as simple as the first-time.

Product parameters:

Refer to the following table for specifications of each unit

Unipanel                                      Central cap                                    Flank cap

Connector                              Back of unipanel                    Sound attenuation blanket  

     Plastic circinal uotiet                      The floor socket

Per square meter proportioning

4main boards＋4 core cover boards＋4 connections＋16 slot cover plates